Difference between revisions of "RoboCup: Redesign 2014-2015"
| Line 25: | Line 25: | ||
== Phase III: Production == | == Phase III: Production == | ||
| − | [https://learn.sparkfun.com/tutorials/electronics-assembly] | + | [https://learn.sparkfun.com/tutorials/electronics-assembly https://learn.sparkfun.com/tutorials/electronics-assembly] |
| + | |||
| + | [http://www.soldermask.com/ http://www.soldermask.com/] <- Sparfun uses these guys for all their solder stencils | ||
Revision as of 02:02, 7 November 2014
Phase I: Techanical Analysis
The first stage of the 2014-2015 RoboCup redesign involves brainstorming potential upgrades by researching new technologies/resources since the last revision. A parallel analysis of current robot bugs and potential enhancements is also done at this time. Outlined below is a listing of resources that the team used in it's brainstorming stage.
Phase II: Design
Batteries
http://www.hobbyking.com/hobbyking/store/__9939__ZIPPY_Flightmax_1800mAh_5S1P_40C.html
http://www.hobbyking.com/hobbyking/store/__25516__ZIPPY_Compact_2450mAh_5S_35C_Lipo_Pack.html
http://www.hobbyking.com/hobbyking/store/__9461__Turnigy_2200mAh_5S_30C_Lipo_Pack.html
http://www.hobbyking.com/hobbyking/store/__9944__ZIPPY_Flightmax_2200mAh_5S1P_40C.html
Phase III: Production
https://learn.sparkfun.com/tutorials/electronics-assembly
http://www.soldermask.com/ <- Sparfun uses these guys for all their solder stencils
