Difference between revisions of "Power Supply Module"
Jump to navigation
Jump to search
m (Found an error on this old page. Doh!) |
m (recategorizing) |
||
| Line 36: | Line 36: | ||
[[Image:Power Schematic.PNG]] | [[Image:Power Schematic.PNG]] | ||
[[Image:Power Board.PNG]] | [[Image:Power Board.PNG]] | ||
| + | |||
| + | [[Category:IGVC|IGVC]][[Category:Year: 2005-2006|Year:_2005-2006]][[Category:Electrical|Electrical]] | ||
Revision as of 20:12, 7 July 2014
For many of the devices used on the IGVC robot, the 24V supplied by the batteries is too great. Therefore, a power supply module sits between the 24V fuse block and several devices. The module provides power to the IGVC Laptop and the JVC Camera specificly. Also, 12V runs out of the supply to a 12V fuse block, providing power for devices such as the Joystick and Sonar.
Parts
Laptop
- LM2678T-ADJ-ND - U1 - Adjustable regulator (set at 19V) for the IGVC Laptop
- C1 - 1000 microfarad capacitor
- C3 - 120 microfarad capacitor
- C6 - 0.01 microfarad capacitor
- R3 - 1 kiloohm resistor
- R4 - 14.7 kiloohm resistor
- DN2416-ND - L1 - 22 microhenry inductor
- MBR2535CTLOS-ND - D1 - common cathode schottky diode
12V Fuse Block
- LM2676T-12-ND - U2 - Switching 12V regulator for 12V fuse block
- C2 - 1000 microfarad capacitor
- C4 - 120 microfarad capacitor
- C7 - 0.01 microfarad capacitor
- DN4508-ND - L2 - 47 microhenry inductor
- 1N5822RLOSCT-ND - D2 - schottky barrier diode
JVC Camera
- LM2941CT-ND - U3 - Adjustable regulator (set at 11V) for the JVC Camera
- R1 - 7.6 kilaohm resistor
- R2 - 1 kilaohm resistor
- R5 - 2.2 kilaohm resistor
- C5 - 120 microfarad capacitor
- LED1 - LED
Electrical
