Difference between revisions of "RC08Drive Module"
Jump to navigation
Jump to search
(→Drive Motor Mount Screws) |
(→Drive Motor Mount Screws) |
||
| Line 66: | Line 66: | ||
:Description - 18-8 SS Flat Head Socket Cap Screw 8-32 Thread, 1/4" Length | :Description - 18-8 SS Flat Head Socket Cap Screw 8-32 Thread, 1/4" Length | ||
| − | =====Drive Motor Mount | + | =====M3 Screws (Drive Motor Mount)===== |
:Vendor - McMaster-Carr | :Vendor - McMaster-Carr | ||
| − | :Part No. - | + | :Part No. - 92125A126 |
| − | :Cost - $ | + | :Cost - $3.73 (Pack of 100) |
| − | :Description - Metric | + | :Description - Metric 18-8 SS Flat Head Socket Cap Screw M3 Size, 6mm Length, 0.5mm Pitch |
===Old=== | ===Old=== | ||
Revision as of 19:14, 29 October 2007
Parts & Componets
Bearings
1/4" Shaft Diameter
- Vendor - McMaster-Carr
- Part No. - 57155K304
- Cost - $6.80 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .25" ID, .5" OD, .125" Width
- Drawing - File:RC08-MC-57155K304.pdf
Gears
Input
- Vendor - SDP/SI
- Part No. - S1063Z-072A020
- Cost - $9.83 ($6.76 in bulk)
- Description - 0.2778" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Al 2024
Output
- Vendor - SDP/SI
- Part No. - S1086Z-072A100
- Cost - $21.36 ($13.46 in bulk)
- Description - 1.3889" Pitch Dia, 0.187" Face Width, 0.25" Bore
- Drawing -
- Note - Al 2024
Output (Option 2)
- Vendor - SDP/SI
- Part No. - S1066Z-072S100
- Cost - $17.72 ($13.02 in bulk)
- Description - 1.3889" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Stainless 303
Shaft & Etc
1/4" Hex Bar Stock
- Vendor - SDP/SI
- Part No. - A 7C21-0436
- Cost - $4.39 Each ($3.27 in bulk)
- Description - Carbon Steel 36" length
1/4" Hex Broache
- Vendor - McMaster-Carr
- Part No. - 2875A15
- Cost - $105.37
- Description - Hexagon Broach 1/4" Hex, 6" Broach Length
1/4" E-Clips
- Vendor - McMaster-Carr
- Part No. - 97633A130
- Cost - $6.54 (Pack of 100)
- Description - Black-Phosphate Steel External Retaining Ring for 1/4" Shaft Diameter
- Note - Inside of bearings
Other
1/2" Long Stand Off
- Vendor - McMaster-Carr
- Part No. - 91780A195
- Cost - $0.34 Each ($0.27 in bulk)
- Description - Aluminum Female Threaded Hex Standoff 1/4" Hex, 1/2" Length, 8-32 Screw Size
1/4" Flat Socket Cap Screws
- Vendor - McMaster-Carr
- Part No. - 92210A190
- Cost - $11.58 (Pack of 100)
- Description - 18-8 SS Flat Head Socket Cap Screw 8-32 Thread, 1/4" Length
M3 Screws (Drive Motor Mount)
- Vendor - McMaster-Carr
- Part No. - 92125A126
- Cost - $3.73 (Pack of 100)
- Description - Metric 18-8 SS Flat Head Socket Cap Screw M3 Size, 6mm Length, 0.5mm Pitch
Old
1/4" Diameter Shaft
- Vendor - McMaster-Carr
- Part No. - 9061K131
- Cost - $8.26 Each
- Description - Alloy 2024 Aluminum Precision Ground Rod 1/4" Diameter, 1' Length
