Difference between revisions of "RC08Drive Module"
Jump to navigation
Jump to search
(→Parts & Componets) |
(→Other) |
||
| Line 40: | Line 40: | ||
===Other=== | ===Other=== | ||
| + | =====1/4" Hex Bar Stock===== | ||
| + | :Vendor - SDP/SI | ||
| + | :Part No. - A 7C21-0436 | ||
| + | :Cost - $4.39 Each ($3.27 in bulk) | ||
| + | :Description - Carbon Steel 36" length | ||
| + | |||
| + | =====1/4" Hex Broaches===== | ||
| + | :Vendor - McMaster-Carr | ||
| + | :Part No. - 2875A15 | ||
| + | :Cost - $105.37 | ||
| + | :Description - Hexagon Broach 1/4" Hex, 6" Broach Length | ||
| + | |||
| + | =====1/4" E-Clips===== | ||
| + | |||
| + | |||
| + | ===Old=== | ||
=====1/4" Diameter Shaft===== | =====1/4" Diameter Shaft===== | ||
:Vendor - McMaster-Carr | :Vendor - McMaster-Carr | ||
Revision as of 19:08, 27 October 2007
Contents
Parts & Componets
Bearings
1/4" Shaft Diameter
- Vendor - McMaster-Carr
- Part No. - 57155K304
- Cost - $6.80 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .25" ID, .5" OD, .125" Width
- Drawing - File:RC08-MC-57155K304.pdf
3/32" Shaft Diameter (Use w/ 4mm)
- Vendor - McMaster-Carr
- Part No. - 57155K208
- Cost - $8.23 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .1562" ID, .3125" OD, .1094" Width
Gears
Input
- Vendor - SDP/SI
- Part No. - S1063Z-072A020
- Cost - $9.83 ($6.76 in bulk)
- Description - 0.2778" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Al 2024
Output
- Vendor - SDP/SI
- Part No. - S1086Z-072A100
- Cost - $21.36 ($13.46 in bulk)
- Description - 1.3889" Pitch Dia, 0.187" Face Width, 0.25" Bore
- Drawing -
- Note - Al 2024
Output (Option 2)
- Vendor - SDP/SI
- Part No. - S1066Z-072S100
- Cost - $17.72 ($13.02 in bulk)
- Description - 1.3889" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Stainless 303
Other
1/4" Hex Bar Stock
- Vendor - SDP/SI
- Part No. - A 7C21-0436
- Cost - $4.39 Each ($3.27 in bulk)
- Description - Carbon Steel 36" length
1/4" Hex Broaches
- Vendor - McMaster-Carr
- Part No. - 2875A15
- Cost - $105.37
- Description - Hexagon Broach 1/4" Hex, 6" Broach Length
1/4" E-Clips
Old
1/4" Diameter Shaft
- Vendor - McMaster-Carr
- Part No. - 9061K131
- Cost - $8.26 Each
- Description - Alloy 2024 Aluminum Precision Ground Rod 1/4" Diameter, 1' Length
1/2" Long Stand Off
- Vendor - McMaster-Carr
- Part No. - 91780A185
- Cost - $0.34 Each ($0.27 in bulk)
- Description - Aluminum Female Threaded Hex Standoff 1/4" Hex, 1/2" Length, 10-32 Screw Size
