Difference between revisions of "RC08Drive Module"
Jump to navigation
Jump to search
(→Gears) |
(→Gears) |
||
| Line 11: | Line 11: | ||
=====Input===== | =====Input===== | ||
:Vendor - SDP/SI | :Vendor - SDP/SI | ||
| − | :Part No. - | + | :Part No. - S1063Z-072S022 |
| − | :Cost - $ | + | :Cost - $10.77 ($8.03 in bulk) |
| − | :Description - 0. | + | :Description - 0.3056" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) |
:Drawing - | :Drawing - | ||
=====Output===== | =====Output===== | ||
:Vendor - SDP/SI | :Vendor - SDP/SI | ||
| − | :Part No. - S1066Z- | + | :Part No. - S1066Z-032S050 |
| − | :Cost - $15. | + | :Cost - $15.86 ($13.49 in bulk) |
| − | :Description - 1. | + | :Description - 1.5625" Pitch Dia, 0.125" Face Width, 0.25" Bore |
:Drawing - | :Drawing - | ||
Revision as of 21:17, 5 October 2007
Contents
Parts & Componets
Bearings
0.25 Shaft Diameter
- Vendor - McMaster-Carr
- Part No. - 57155K304
- Cost - $6.80 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .25" ID, .5" OD, .125" Width
- Drawing - File:RC08-MC-57155K304.pdf
Gears
Input
- Vendor - SDP/SI
- Part No. - S1063Z-072S022
- Cost - $10.77 ($8.03 in bulk)
- Description - 0.3056" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
Output
- Vendor - SDP/SI
- Part No. - S1066Z-032S050
- Cost - $15.86 ($13.49 in bulk)
- Description - 1.5625" Pitch Dia, 0.125" Face Width, 0.25" Bore
- Drawing -
