Difference between revisions of "RC08Drive Module"
Jump to navigation
Jump to search
(→Output) |
(→Gears) |
||
| Line 12: | Line 12: | ||
:Vendor - SDP/SI | :Vendor - SDP/SI | ||
:Part No. - S1023Z-120S036 | :Part No. - S1023Z-120S036 | ||
| − | :Cost - $13.93($9.39 in bulk) | + | :Cost - $13.93 ($9.39 in bulk) |
:Description - 0.3" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) | :Description - 0.3" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) | ||
:Drawing - | :Drawing - | ||
| Line 19: | Line 19: | ||
:Vendor - SDP/SI | :Vendor - SDP/SI | ||
:Part No. - S1066Z-032S048 | :Part No. - S1066Z-032S048 | ||
| − | :Cost - $15.55($13.08 in bulk) | + | :Cost - $15.55 ($13.08 in bulk) |
:Description - 1.5" Pitch Dia, 0.125" Face Width, 0.25" Bore | :Description - 1.5" Pitch Dia, 0.125" Face Width, 0.25" Bore | ||
:Drawing - | :Drawing - | ||
Revision as of 20:09, 5 October 2007
Contents
Parts & Componets
Bearings
0.25 Shaft Diameter
- Vendor - McMaster-Carr
- Part No. - 57155K304
- Cost - $6.80 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .25" ID, .5" OD, .125" Width
- Drawing - File:RC08-MC-57155K304.pdf
Gears
Input
- Vendor - SDP/SI
- Part No. - S1023Z-120S036
- Cost - $13.93 ($9.39 in bulk)
- Description - 0.3" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
Output
- Vendor - SDP/SI
- Part No. - S1066Z-032S048
- Cost - $15.55 ($13.08 in bulk)
- Description - 1.5" Pitch Dia, 0.125" Face Width, 0.25" Bore
- Drawing -
