Difference between revisions of "RC09KickerElectronics"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
===Isolation=== | ===Isolation=== | ||
| − | We will have a | + | We will have isolated voltage feedback. The voltage will be transmitted via a SPI ADC over a digital isolator. |
| + | |||
| + | ====Digital Isolator | ||
| + | : Manufacturer - SciLabs | ||
| + | : Manufacturer Part Number - SI8441 | ||
==Parts== | ==Parts== | ||
Revision as of 14:46, 29 March 2009
Contents
Schematics
Isolation
We will have isolated voltage feedback. The voltage will be transmitted via a SPI ADC over a digital isolator.
====Digital Isolator
- Manufacturer - SciLabs
- Manufacturer Part Number - SI8441
Parts
Capacitor
We are gonna shoot for between 4000-5000uF by using two of the following
- Vendor - Digikey
- Vendor Part Number - P13835-ND
- Manufacturer - Panasonic
- Manufacturer Part Number - EET-UQ2E222LA
- Cost - $7.236 quant 10
- Description - 2200uF kicker capacitors
- EET-UQ2E222LA
- datasheet
Capacitor Charger
Kicker electronics will be similar to previous years
IGBT
- Vendor -
- Vendor Part Number -
- Manufacturer - Fairchild
- Manufacturer Part Number - FGA180N33ATDTU
- Cost -
- digikey
- datasheet
- Fairchild FGA180N33ATDTU link
Solenoid
See the Solenoid Development page for more information. For logistics reasons, we may purchase a solenoid as we did last year and take it apart for use in our mounting apparatus.
- Candidate winding: 22AWG from http://www.solenoidcity.com/solenoid/tubular/s-20-125hp1.htm
