Difference between revisions of "RC08-Dribbler"
Jump to navigation
Jump to search
(→Motor) |
|||
| Line 11: | Line 11: | ||
==Dribbler bar== | ==Dribbler bar== | ||
| + | |||
| + | ==Specs from CMU== | ||
| + | *Dribbler motor gear: S10T05M042A0303 Module 0.5, 42 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear | ||
| + | *Dribbler bar gear: S10T05M028A0305 Module 0.5, 28 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear | ||
| + | *spur gear reduction 1:1.5 | ||
| + | *Dribbler Motor - Maxon | ||
| + | **266521 | ||
| + | **http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_154_e.pdf | ||
| + | **nominal speed 28200 rpm | ||
| + | |||
| + | *Gearhead | ||
| + | **118184 - Maxon | ||
| + | **http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_215_e.pdf | ||
| + | **reduction 5.4:1 | ||
| + | |||
| + | *nominal dribbler bar speed = 28200/5.4*1.5 = 7833 RPM. It is, of course, adjustable by software. | ||
Revision as of 15:31, 21 September 2007
This page contains the information and documentation of the 2008 dribbler system
Contents
Motor
- Need to still find motor - something with short lead time, possibly a hobby store
- places to look
Gearing
- Example geared down dribbler bar speed used in CMU robots ~7800 RPM
Dribbler bar
Specs from CMU
- Dribbler motor gear: S10T05M042A0303 Module 0.5, 42 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
- Dribbler bar gear: S10T05M028A0305 Module 0.5, 28 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
- spur gear reduction 1:1.5
- Dribbler Motor - Maxon
- 266521
- http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_154_e.pdf
- nominal speed 28200 rpm
- Gearhead
- 118184 - Maxon
- http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_215_e.pdf
- reduction 5.4:1
- nominal dribbler bar speed = 28200/5.4*1.5 = 7833 RPM. It is, of course, adjustable by software.
