Difference between revisions of "Laptop/CAN Interface"
Jump to navigation
Jump to search
m (Editted links.) |
m (Added image of board layout.) |
||
| Line 23: | Line 23: | ||
===Oscillator=== | ===Oscillator=== | ||
| − | + | ||
*300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator | *300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator | ||
| Line 42: | Line 42: | ||
[[Image:LaptopCAN Schematic.png]] | [[Image:LaptopCAN Schematic.png]] | ||
| − | + | [[Image:LaptopCAN Board.png]] | |
==Code== | ==Code== | ||
Revision as of 01:31, 7 January 2006
The Laptop/CAN Interface sits at the head of the CAN bus and has a CAN address of 1, giving it highest device priority next to the E-Stop.
Contents
Parts
Part numbers listed are those of the Digi Key Corporation parts database.
Processor
CAN Specific
- MCP2515 - U2 - Microchip CAN Controller with SPI Interface
- MCP2551 - U1 - Microchip CAN TransponderP966-ND
- 14.7KXBK-ND - RN1 - 14.7 ohm Metal Film Resistor
Onboard Power Control
- 296-12290-1-ND - U4 - 5V Linear Regulator
- 1N4004GICT-ND - D1 - Diode
- P966-ND - C1,C2 - 10 microfarad Capacitor
- 399-2127-ND - C3,C4 - 0.1 microfarad Capacitor
Oscillator
- 300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator
Receptacles
- 2-pin MTA100 - J1 - Power receptacle
- 3-pin MTA100 - J2 - CAN receptacle
- 7-pin MTA100 - J3 - Connect laptop to interface
Misc.
- 377-1090-ND - Box to contain the module
- 1892K-ND - Standoffs
Electrical
