Difference between revisions of "Materials Database"
Jump to navigation
Jump to search
(→Aluminum 6061-T6) |
(→Aluminum 6061-T6) |
||
Line 48: | Line 48: | ||
|- | |- | ||
| Modulus of Elasticity | | Modulus of Elasticity | ||
− | | | + | | 10^7 psi |
|- | |- | ||
|- | |- |
Revision as of 07:49, 14 December 2022
AR500 Steel
Type | Carbon Steel |
Modulus of Elasticity | 30 x 10^6 psi |
Poisson's Ratio | 0.29 |
Density | 0.29 lb/in^3 |
Ultimate Tensile Strength | 225 ksi |
Tensile Yield Strength | 200 ksi |
Brinell Hardness | 450 HB |
Rockwell Hardness | C48 |
Elongation at Break | 12% |
Familiar Sellers | McMaster Carr, MakeItRingTargets, Alro Steel, SendCutSend |
Material Description:
- High strength, ultra wear resistant steel used in body armor and shooting targets
- Hardened steel is difficult to machine, is typically only used for Waterjet parts
- Typically used for weapons due to it's high strength, toughness, and relatively high hardness
- Anecdotal experience from builders says that AR500 typically bends before it fractures
Aluminum 6061-T6
Type | Aluminum Alloy |
Modulus of Elasticity | 10^7 psi |
Poisson's Ratio | 0.33 |
Density | 0.0984 lb/in^3 |
Ultimate Tensile Strength | 45 ksi |
Tensile Yield Strength | 39 ksi |
Brinell Hardness | 93 HB |
Rockwell Hardness | B52 |
Elongation at Break | 10% |
Familiar Sellers | McMaster Carr, Midwest Steel, SendCutSend |
Material Description:
- High strength, ultra wear resistant steel used in body armor and shooting targets
- Hardened steel is difficult to machine, is typically only used for Waterjet parts
- Typically used for weapons due to it's high strength, toughness, and relatively high hardness
- Anecdotal experience from builders says that AR500 typically bends before it fractures
Data Sources
- AR500 Steel: SendCutSend, McMaster Carr, Steel Warehouse