View source for Tool Guide: LulzBot Mini 3D Printer

[[Category:Tool Guides]]
[[Category:Shop]]

[[File:Lulzbot_mini_v1.png|thumb|right|400px]]

==General Information==
* [https://www.lulzbot.com/store/printers/lulzbot-mini Product Page]
* [https://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf User Manual]
* Manufacturer: LulzBot
* Model: LulzBot Mini v1.04
* Purchased From: SparkFun AVC Prize (2017)

==Usage Information==
'''NEVER''' apply any chemicals / substances to the surface of the printer unless instructed to do so in this guide or by a RoboJackets officer.

'''ALWAYS''' remove finished parts in a timely manner. Do not leave your finished part on the printer for a full week just because that's when your next team meeting is.

===What Materials Can I Print In?===
We'll do our best to always have a roll of PLA in the printer, as it's our go-to 3D printing material.

The LulzBot Mini is, however, capable of printing from a wide range of materials as the heated nozzle can reach 300 degrees Celcius. Always contact the RoboJackets shop manager before attempting to print in any material besides PLA.

===What Kind of Support Should I Use?===
Coming soon.

===What Kind of Bed Adhesion Should I Use?===
Coming soon.

===What Layer Height Should I Use?===
Coming soon.

==Regular Maintenance Tasks==
* [https://ohai.lulzbot.com/project/mini-wiper-pad-replacement/ Replace Nozzle Wiper]
** Frequency: As needed. Probably at least once a year under regular use.
** Should only be done by a RoboJackets officer.
* [https://ohai.lulzbot.com/project/mini-replacing-pei/maintenance-repairs/ Replace PEI Sheet]
** Frequency: As needed. Should not have to do this often. May even last more than a year.
** Should only be done by a RoboJackets officer.
* [https://www.lulzbot.com/learn/tutorials/how-change-filament-lulzbot-mini-tutorial Replace Filament]
** Frequency: Whenever the current roll runs out of filament.
** Can be done by any trained RoboJackets member.

Other maintenance instructions available at [https://ohai.lulzbot.com/group/maintenance-repairs/ https://ohai.lulzbot.com/group/maintenance-repairs/]

==Spare Parts==
[https://www.lulzbot.com/store/parts All LulzBot Parts]

* [https://www.lulzbot.com/store/parts/lulzbot-mini-heat-bed-kit Heated Bed Kit]
* [https://www.lulzbot.com/store/parts/lulzbot-mini-pei-sheet PEI Sheet]
* [https://www.lulzbot.com/store/parts/lulzbot-wiper-replacement-kit-5pk Wiper Replacement Pack]

==Maintenance History==
This section is for noting any major repairs or maintenance that happen on this tool that future shop managers should probably know about. 
{| class="wikitable"
|-
|Date
|Person
|Description of Work
|-
|
|
|
|}