Tool Guide: LulzBot Mini 3D Printer
Revision as of 16:10, 4 October 2018 by Mbarulic6 (talk | contribs) (Created page with "Category:Tool Guides Category:Shop thumb|right|400px ==General Information== * [https://www.lulzbot.com/store/printers/lulzbot-mini Prod...")
Contents
General Information
- Product Page
- User Manual
- Manufacturer: LulzBot
- Model: LulzBot Mini v1.04
- Purchased From: SparkFun AVC Prize (2017)
Usage Information
NEVER apply any chemicals / substances to the surface of the printer unless instructed to do so in this guide or by a RoboJackets officer.
ALWAYS remove finished parts in a timely manner. Do not leave your finished part on the printer for a full week just because that's when your next team meeting is.
What Kind of Support Should I Use?
Coming soon.
What Kind of Bed Adhesion Should I Use?
Coming soon.
What Layer Height Should I Use?
Coming soon.
Regular Maintenance Tasks
- Replace Nozzle Wiper
- Frequency: As needed. Probably at least once a year under regular use.
- Should only be done by a RoboJackets officer.
- Replace PEI Sheet
- Frequency: As needed. Should not have to do this often. May even last more than a year.
- Should only be done by a RoboJackets officer.
- Replace Filament
- Frequency: Whenever the current roll runs out of filament.
- Can be done by any trained RoboJackets member.
Other maintenance instructions available at https://ohai.lulzbot.com/group/maintenance-repairs/
Spare Parts
Maintenance History
This section is for noting any major repairs or maintenance that happen on this tool that future shop managers should probably know about.
| Date | Person | Description of Work |
