Difference between revisions of "RC09-Omni"

From RoboJackets Wiki
Jump to navigation Jump to search
Line 4: Line 4:
 
==Drawings==
 
==Drawings==
  
==Materials==
 
  
 
==Assembly Structure==
 
==Assembly Structure==
====Parts List====
 
====Tools needed====
 
:3 axis CNC Mill
 
:WaterJet
 
:Hex Keys
 
:Press
 
:CNC Lathe(parts are outsourced)
 
====Instructions====
 
=====Fabrication=====
 
#The Omni body is fabricated through the use of the HAAS a 3 axis CNC Mill. The 3/8'' plate is used for this process
 
#The Omni Plate or Wheel plate is made with the Waterjet using the .063'' 7075 aluminum sheet.
 
##Due to the Omni Plates being quite small it is advised that you connect at least 2 together and then grinding away the small connection.
 
#The omni rollers are outsourced. If one has access to a CNC lathe then one could fabricate one's own.
 
#The planetary gear is also outsourced.
 
=====Assembly=====
 
# Put o-rings in the groove in the rollers and press the 1/16'' dowel pins into the hole.
 
# Use the press to press the bearing into the center hole of the omni body and the dowel pins into the 3 holes surrounding it.
 
# On the back of the omni body place the plastic inserts into the small holes.
 
# Attach the planetary gear by screwing in the 0-80 screws into the plastic inserts.
 
# Place rollers with o-rings and dowel pins into the grooves on the omni body
 
# Fit plate on top of the omni body and secure it by screwing in the 6-32x1/4 screws.
 
 
  
  
 +
  
 
==Parts & Components==
 
==Parts & Components==
Line 82: Line 60:
 
:Description - Neoprene O-Ring AS568A Dash Number 012
 
:Description - Neoprene O-Ring AS568A Dash Number 012
  
==Fabrication==
+
==Assembly==
=====Omni Plates=====
+
====Tools needed====
: Can be done in house on Haas for prototype.
+
:3 axis CNC Mill
: Fleet should be water jetted.
+
:WaterJet
 
+
:Hex Keys
=====Omni Bodies=====
+
:Press
: In House on Haas VF-2
+
:CNC Lathe(parts are outsourced)
 
+
====Instructions====
=====Omni Rollers=====
+
=====Fabrication=====
: MFG.com - CNC Lathe Required
+
#The Omni body is fabricated through the use of the HAAS a 3 axis CNC Mill. The 3/8'' plate is used for this process
 +
#The Omni Plate or Wheel plate is made with the Waterjet using the .063'' 7075 aluminum sheet.
 +
##Due to the Omni Plates being quite small it is advised that you connect at least 2 together and then grinding away the small connection.
 +
#The omni rollers are outsourced. If one has access to a CNC lathe then one could fabricate one's own.
 +
#The planetary gear is also outsourced.
 +
=====Assembly=====
 +
# Put o-rings in the groove in the rollers and press the 1/16'' dowel pins into the hole.
 +
# Use the press to press the bearing into the center hole of the omni body and the dowel pins into the 3 holes surrounding it.
 +
# On the back of the omni body place the plastic inserts into the small holes.
 +
# Attach the planetary gear by screwing in the 0-80 screws into the plastic inserts.
 +
# Place rollers with o-rings and dowel pins into the grooves on the omni body
 +
# Fit plate on top of the omni body and secure it by screwing in the 6-32x1/4 screws.
  
 
==Cost Estimates==
 
==Cost Estimates==

Revision as of 03:34, 3 October 2012

As part of the RoboCup 2009 Mechanical, the Omni Wheels allow the robots to move in any direction at anytime.

2009 RoboJackets RoboCup Omni Wheel

Drawings

Assembly Structure

Parts & Components

Amounts are based on per robot. Materials are in sizes for prototyping not lowest cost per robot volume pricing if available is in parenthesis.

Stock

Plate - Wheel Plate
Vendor - McMaster-Carr
Part No. - 8885K13
Cost - $21.63
Description - Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
Plate - Wheel Body
Vendor - McMaster-Carr
Part No. - 9246K23
Cost - $28.51
Description - Multipurpose Aluminum (Alloy 6061) 3/8" Thick, 12" X 12"
Shaft - Rollers
Vendor - McMaster-Carr
Part No. - 9063K243
Cost - $17.48
Description - Alloy 7075 Aluminum Precision Ground Rod 1/8" Diameter, 3' Length
Note: Usually ships within 2 weeks.

Fasteners

6-32 Low Head Socket Cap Screw
Vendor - McMaster-Carr
Part No. - 92220A141
Cost - $7.42 (packs of 25)
Description - Alloy Steel Low Head Socket Cap Screw 6-32 Thread, 1/4" Length
3/16" Dowel Pin
Vendor - MSC
Part No. - 88231758
Cost - $43.08 (per 100)
Description - Precision Ground Dowel Pins - Stainless Steel Type: Dowel Pin Diameter: 3/16 Overall Length: 1/4 Material: Stainless Steel - 416 SS Finish/Coating: Bright
1/16" Dowel Pin
Vendor - MSC
Part No. - 88231196
Cost - $19.83 (per 100)
Description - Precision Ground Dowel Pins - Stainless Steel Type: Dowel Pin Diameter: 1/16 Overall Length: 1/4 Material: Stainless Steel - 416 SS Finish/Coating: Bright

Other

O-Ring
Vendor - McMaster-Carr
Part No. - 94115K012
Cost - $2.87 (Pks of 100)
Quantity -
Description - Neoprene O-Ring AS568A Dash Number 012

Assembly

Tools needed

3 axis CNC Mill
WaterJet
Hex Keys
Press
CNC Lathe(parts are outsourced)

Instructions

Fabrication
  1. The Omni body is fabricated through the use of the HAAS a 3 axis CNC Mill. The 3/8 plate is used for this process
  2. The Omni Plate or Wheel plate is made with the Waterjet using the .063 7075 aluminum sheet.
    1. Due to the Omni Plates being quite small it is advised that you connect at least 2 together and then grinding away the small connection.
  3. The omni rollers are outsourced. If one has access to a CNC lathe then one could fabricate one's own.
  4. The planetary gear is also outsourced.
Assembly
  1. Put o-rings in the groove in the rollers and press the 1/16 dowel pins into the hole.
  2. Use the press to press the bearing into the center hole of the omni body and the dowel pins into the 3 holes surrounding it.
  3. On the back of the omni body place the plastic inserts into the small holes.
  4. Attach the planetary gear by screwing in the 0-80 screws into the plastic inserts.
  5. Place rollers with o-rings and dowel pins into the grooves on the omni body
  6. Fit plate on top of the omni body and secure it by screwing in the 6-32x1/4 screws.

Cost Estimates

Action Log

  1. 10/19/2008 - Initial revised roller design completed.
  2. 11/02/2008 - Added new groove style for new rollers.
  3. 11/09/2008 - Refined roller design.
  4. 12/30/2008 - Resized to match internal gear dimensions.
  5. 01/13/2009 - Added fillets.
  6. 02/01/2009 - Drawing for rollers produced and ready to be posted for quote.
  7. 02/22/2009 - Design for prototype completed.
  8. 03/15/2009 - Rollers posted to mfg.com for quote.
  9. 03/17/2009 - Design revised. Internal gear added to omni body.
  10. 03/25/2009 - Supplier for rollers selected.
  11. 04/08/2009 - All 400 Rollers arrive for omni wheels.
  12. 05/05/2009 - 1/2 of rollers are assembled.
  13. 07/18/2009 - Omni bodies CAM'd.
  14. 01/26/2010 - Omni plates for prototype water jetted.
  15. 02/03/2010 - Tooling required to make omni bodies arrives.
  16. 02/13/2010 - First omni body completed. Problems encountered with automated tapping of 6-32s.
  17. 03/20/2010 - Last omni body for prototype made.
  18. 03/23/2010 - Revisions made to omni design to allow for better draining of retaining compound, symmetrical plate positioning, and new bearings.
  19. 04/03/2010 - First fleet omni body made. Process is down to 2hrs.