Difference between revisions of "RC08-Dribbler"

From RoboJackets Wiki
Jump to navigation Jump to search
(Parts & Components)
Line 26: Line 26:
 
===Gears===
 
===Gears===
 
=====Motor gear=====
 
=====Motor gear=====
Vendor: SDP/SI
+
:Vendor: SDP/SI
Part No.: A 1B 2MYK05030H
+
:Part No.: A 1B 2MYK05030H
Description: 3mm bore, 30 teeth, 15mm pitch diameter, brass gear with set screw  
+
:Description: 3mm bore, 30 teeth, 15mm pitch diameter, brass gear with set screw  
Cost: $6.72
+
:Cost: $6.72
Drawing:[https://sdp-si.com/ss/PDF/SSUM7025.PDF Motor Gear Spec Sheet]
+
:Drawing:[https://sdp-si.com/ss/PDF/SSUM7025.PDF Motor Gear Spec Sheet]
  
 
*Connects directly to output of motor and powers dribbler roller
 
*Connects directly to output of motor and powers dribbler roller
  
 
=====Roller gear=====
 
=====Roller gear=====
Vendor: SDP/SI
+
:Vendor: SDP/SI
Part No.: A 1B 2MYK08020
+
:Part No.: A 1B 2MYK08020
Description: 4mm bore, 20 teeth, 16mm pitch diameter, brass gear with set screw
+
:Description: 4mm bore, 20 teeth, 16mm pitch diameter, brass gear with set screw
Cost: $9.12
+
:Cost: $9.12
Drawing:[https://sdp-si.com/ss/PDF/78501043.pdf Dribbler Gear Spec Sheet]
+
:Drawing:[https://sdp-si.com/ss/PDF/78501043.pdf Dribbler Gear Spec Sheet]
  
 
*Roller gear needs be turned down from 7mm face to 2mm face width
 
*Roller gear needs be turned down from 7mm face to 2mm face width
Line 46: Line 46:
 
===Plates===
 
===Plates===
 
=====Swing=====
 
=====Swing=====
Vendor: McMaster-Carr
+
:Vendor: McMaster-Carr
Part No.: 8885K13
+
:Part No.: 8885K13
Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
+
:Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
Cost: $21.73
+
:Cost: $21.73
  
 
*Contains the roller shaft, the motor mounts, spacers, and hinge shafts
 
*Contains the roller shaft, the motor mounts, spacers, and hinge shafts
Line 56: Line 56:
  
 
=====Motor plate=====
 
=====Motor plate=====
Vendor: McMaster-Carr
+
:Vendor: McMaster-Carr
Part No.: 8885K13
+
:Part No.: 8885K13
Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
+
:Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
Cost: $21.73
+
:Cost: $21.73
  
 
*Supports motor and connects to the 2 spacers in assembly
 
*Supports motor and connects to the 2 spacers in assembly
Line 80: Line 80:
 
===Other===
 
===Other===
 
=====4mm snap thrust bearing=====
 
=====4mm snap thrust bearing=====
Vendor: McMaster-Carr
+
:Vendor: McMaster-Carr
Part No.:7817K33
+
:Part No.:7817K33
Description: Metric Nylon Snap-in Thrust Bearing for 4mm Shaft Dia, 1.45-2.34 mm Sheet Metal Thick
+
:Description: Metric Nylon Snap-in Thrust Bearing for 4mm Shaft Dia, 1.45-2.34 mm Sheet Metal Thick
Cost: $1.32
+
:Cost: $1.32 each
  
 
*supports dribbler shaft in the swing
 
*supports dribbler shaft in the swing

Revision as of 22:11, 22 December 2007

This page contains the information and documentation of the 2008 dribbler system

Robocup 2008 Mechanical

Assembly Structure

Parts & Components

Motor

Vendor: MicroMo

  • Motor: 12V DC brushless servo motor #E-1628B
    • $147.10 each
  • Planetary gearhead: #E-167 gear reduction: 14
  • Complete assembly 1628-V-0003

Cost: $200.40 each

  • Electrical specification
    • 12 Volts
    • must have position or speed encoders
    • brushless DC

Gears

Motor gear
Vendor: SDP/SI
Part No.: A 1B 2MYK05030H
Description: 3mm bore, 30 teeth, 15mm pitch diameter, brass gear with set screw
Cost: $6.72
Drawing:Motor Gear Spec Sheet
  • Connects directly to output of motor and powers dribbler roller
Roller gear
Vendor: SDP/SI
Part No.: A 1B 2MYK08020
Description: 4mm bore, 20 teeth, 16mm pitch diameter, brass gear with set screw
Cost: $9.12
Drawing:Dribbler Gear Spec Sheet
  • Roller gear needs be turned down from 7mm face to 2mm face width
  • Powers the dribbler roller - is recessed into the roller itself

Plates

Swing
Vendor: McMaster-Carr
Part No.: 8885K13
Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
Cost: $21.73
  • Contains the roller shaft, the motor mounts, spacers, and hinge shafts
  • Material is same and shared with Omniwheel plates
  • Left and right swings are identical
Motor plate
Vendor: McMaster-Carr
Part No.: 8885K13
Description: Alloy 7075 Aluminum Sheet .063" Thick, 12" X 12"
Cost: $21.73
  • Supports motor and connects to the 2 spacers in assembly
  • Material is same and shared with Omniwheel plates

Spacers

Spacer1
Spacer2

Fasteners

Shaft

Hinge shaft
Dribbler shaft

Spring

Torsion spring

Other

4mm snap thrust bearing
Vendor: McMaster-Carr
Part No.:7817K33
Description: Metric Nylon Snap-in Thrust Bearing for 4mm Shaft Dia, 1.45-2.34 mm Sheet Metal Thick
Cost: $1.32 each
  • supports dribbler shaft in the swing

Notes

  • 4mm steel shaft chosen to increase strength to prevent bending of dribbler shaft when hit with a ball
  • roller diameter - .5"
  • dribbler shaft still slides free in between two snap-in thrust bearings and can be removed to allow the roller to be changed out

Dribbler bar prototypes

  • shaft diameter on ends of bar - 3mm
  • maximum diameter of dribbler - .75"
  • the dribbler bar prototypes will be lathed and done coated with neoprene heat shrink

Dribbler bar prototype drawing

dribbler bar prototypes

  • 3/4" diameter aluminum bar stock
    • $8.34
    • McMaster part number 6750K181
  • 3mm diameter aluminum bar stock
    • $6.94
    • McMaster part number 1681T21
  • 3/4" neoprene heat shrink
    • pack of 5 for $8.97
    • McMaster part number 7505K86
  • 3mm e-clips
    • pack of 100 for $3.03
    • McMaster part number 98543A101

2007 Dribbler

Drive gear

  • attached to the motor
  • SDP/SI A-1B-2MYK05045 Data sheet
  • 45 teeth, 3mm bore, 22.5mm pitch diameter

Dribbler gear

  • attached to the roller. This is done by pressing having a set screw in the gear interfere with the roller. Both the gear and roller are free to spin on the shaft, which permitting easy change.
  • SDP/SI A-1B-2MYKO5020H Data sheet
  • 20 teeth, 3mm bore, 10mm pitch diameter
  • gear ratio from motor to drilbber = 2.25

Motor

  • 15.9mm diameter, 3mm output shaft

Specs from CMU

  • Dribbler motor gear from SDP-SI: S10T05M042A0303 Module 0.5, 42 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
  • Dribbler bar gear from SDP-SI: S10T05M028A0305 Module 0.5, 28 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
  • spur gear reduction 1:1.5
  • Dribbler Motor - Maxon
  • nominal dribbler bar speed = 28200/5.4*1.5 = 7833 RPM. It is, of course, adjustable by software.