Prototype Modification List 2015

From RoboJackets Wiki
Revision as of 15:12, 29 March 2015 by Ochasteen (talk | contribs) (Created page with "This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype. *Kicker solenoid was raised by modifying front and back face of so...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype.

  • Kicker solenoid was raised by modifying front and back face of solenoid.
  • Midplate mouth cutout was increased in width to account for dribbler wires.
  • Dribbler mounts were moved outwards .005 in on each side to allow for sliding tolerance for dribbler.