Difference between revisions of "Prototype Modification List 2015"
Jump to navigation
Jump to search
(Created page with "This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype. *Kicker solenoid was raised by modifying front and back face of so...") |
|||
| Line 4: | Line 4: | ||
*Midplate mouth cutout was increased in width to account for dribbler wires. | *Midplate mouth cutout was increased in width to account for dribbler wires. | ||
*Dribbler mounts were moved outwards .005 in on each side to allow for sliding tolerance for dribbler. | *Dribbler mounts were moved outwards .005 in on each side to allow for sliding tolerance for dribbler. | ||
| + | |||
| + | [[Category: RoboCup]] | ||
| + | [[Category: Year: 2014-2015]] | ||
Revision as of 21:56, 13 June 2018
This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype.
- Kicker solenoid was raised by modifying front and back face of solenoid.
- Midplate mouth cutout was increased in width to account for dribbler wires.
- Dribbler mounts were moved outwards .005 in on each side to allow for sliding tolerance for dribbler.
