Homecoming car

From RoboJackets Wiki
Revision as of 22:00, 5 March 2018 by Mbarulic (talk | contribs)
Jump to navigation Jump to search

Welcome! You've found yourself on the page for the Homecoming Car.

10644703 601719963291031 2139300614443510723 o.jpg

Background

The Homecoming Car, a.k.a. the Buzzmobile, was a joint effort between The Agency and RoboJackets. Commissioned and sponsored by the CoC's Ofice of Enrollment and Community, was an autonomous parade float modeled after the Ramblin' Wreck for Georgia Tech's Wreck Parade homecoming event.

Hardware

Homecoming car is a nearly full sized replica of the Wreck. It has a body made of plywood supported by a steel frame. Many of the components on the car overlap with components found on a standard FRC robot. Buzzmobile has a 6-CIM chain drive train. The CIM motors are controlled by Victor motor controllers from Cross the Road Electronics. The victors receive their messages from an on board Arduino Uno. The Arduino also talks to the pneumatic break on the car and can honk the horn of the wreck.

Software

The code powering the homecoming car can be found on Github. This is also where documentation on operating the car can be found. The majority of the code running the robot is written with Python and ROS, although there are some nodes written in C++.

Recommended supplies

Following is a list of recommended things to take down to The Cage (the home of the car).

- A fan (it gets hot down there)

- Extension cords

- A multimeter