RoboJackets Wiki - User contributions [en]

Binari

2022-05-22T19:47:58Z

Lbricker7: /* AVC 2022 */

== Introduction ==
This robot had a name before a design. It born when Brian thought to himself, "Hey, it would be really funny if we named a robot Chonki and made it really, really big and really really loud..." Throughout the design process the robot lived up to its name. Chonkii is a 45lb shuffling shell spinner competing in the 30lb weight class that serves as an iteration on the original Chonki, which was never fully constructed. It was developed during 2021-2022. The drive system was iterated from that of Apachi and Chonki. The weapon system was a brand new concept for BattleBots. The goal of Chonki was to evaluate the viability of shell spinners while taking advantage of the 1.5 times weight multiplier afforded by using a mechanism other than wheels for movement. Competed at Motorama 2022 and finished with a 2-2 record.

Members:
*George 'Knute' Brady (Lead)
*Paul Matesevac
*Lucy Bricker
*James Peavy
*Joe Irwin
*Mannan Goel

== Drive System ==
Chonki utilizes a shuffler system for drive. It consists of two shuffler modules, each with 4 UHMWPE feet. The feet sit on two parallel, keyed cam shafts. These allowed for the four feet to be positioned 90 degrees from each other, so feet would always be in contact with the ground through the cam shaft's rotation. To fit inside the feet get smaller as they move away from the chassis. The longer feet have fillets to clear the rollers and support which they sit under. The cams have offset keyed holes to accommodate the shafts and sit inside circular cutouts in the feet, which keep them parallel with the ground as it walks. The use of the shuffling system allowed Chonki a weight bonus, bringing the max weight to 45 lbs.

[[File:IMG_2847.MOV|480x360px|]]

=== Foot Profile ===

=== Cams and Bearings ===

=== Drive Gears ===

== Weapon System ==

===Design Considerations===
Because we had 2 weapons, it was important to have them be light enough as to not surpass a combined weight of ~15 lbs. The extra weight bonus from the shuffler allowed for this to be much more feasible (also required because we have 2x the weapon motors).

===Weapon Design===

Overall Design: Made to resemble Valkyri's overall weapon stack, minor changes were made to the overall design, A roller bearing (in design) was not needed at the bottom because of the constraint on the shaft itself (enough distance to spin without touching the bottom plate). This did not work, therefore a needle roller bearing should always be strongly considered in future live-shaft designs despite clearance looking good enough.

Weapon: Our weapons were waterjet out of AR500 steel (made from sheets of gun target steel). Each weapon was 0.5 inches in thickness and 11 inches in diameter. The overall shape was intended to put as much mass at the hitting ends as possible, there was no need to save weight therefore we were able to have a solid weapon. There was added structural support around the location that met with our weapon shaft, this was to theoretically prevent any snapping of the weapon (fears due to Apachi's weapon failure). Additionally, the weapon's geometry was made in order to ensure that at the maximum distance, only 1 point has the possibility of hitting (in order to reduce the chance of us 'skimming' the other bot instead of properly hitting it).

Belt Protection: Carbon fiber reinforced nylon material called Onyx, printed on a Markforged 3D printer. The print was not the best, therefore our belt protection was pretty non-existent. Also, the material may not have been a good choice, as carbon fiber doesn't resist instantaneous hits very well.

Lessons:
*Do not use our classical belts, use industrial/automotive belts instead
*Look for better protection for belts/weapon stacks (testing materials/more research)
*AR500 is sorta hard to machine (we need to basically increase the waterjet thickness, machinability, and possibly do 2 passes)

===Weapon Stack and Weapon Pictures===

[[File:Bearing_Section_View.PNG]]

== Chassis System ==
[[File:ChonkiiChassis.png|480x360px|]]
*The chassis mostly consisted of aluminum, featuring of a ¼” top and side plates and ⅛” bottom plate.
*The front and back plates were made of HDPE, which bent to form Chonkii’s robustly round shape.
*The chassis had multiple rollers spaced out along its top, giving additional support to the shell track above.
*The central dead axle was constrained by two blocks, mounted to both the top and bottom plates. However, it was later determined that a single longer block with a key would constrain the shaft better than the two block system.
**While drilling through the blocks into the shaft, a drill bit melted inside, acting as a makeshift pin (that was instantly destroyed in competition).

== Electronics ==
{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| Turnigy Aerodrive SK3 - 5055-280KV Brushless Outrunner Motor
 
|-
| Drive Motor Controllers
| Flipsky Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink Mini Size (whatever apachi used)
|-
| Weapon Motor
| Scorpion SII-4035-250KV
|-
| Weapon Motor Controllers
| Tribunus 06-120A (6S) Brushless ESC
|-
| Receiver
| Hobby King 2.4Ghz Receiver 6Ch V2 
|-
| Remote Control
| Hobby King 2.4Ghz 6Ch Tx and Rx V2 
|-
| Battery
| Turnigy Heavy Duty 5000mAh 6S 60C LiPo Pack w/XT90
Turnigy Graphene Panther 3000mAh 3S 75C Battery Pack w/XT90
|-
|}

== Competitions ==

=== [[AVC_2022|AVC 2022]] ===

*Results: 0-2
**Bracket Style: Double Elimination
***[Binari (loser) V.S. Crippling Depression (winner): YouTube Link]
**** Crippling Depression was a wedge and undercutter combination bot.
**** As an undercutter, the weapon went underneath ours, slightly sheared one of our bolts
**** After getting flipped, they absolutely destroyed the weapon guards and side armor and bent our shuffler system and front plate
**** Lost via tap-out
***[Binari (loser) V.S. HUHMWPE DUHMWPE (winner): YouTube Link]
**** Ripped off sideplate, and the shuffler system slowly fell apart
**** Lost via tap-out
**** More Description

==== Issues ====

* Stuff
* Other Stuff

==== Changes to make ====

* Stuff
* Other Stuff

== Trivia ==
*The Vectrax was rendered inoperable twice by Chonki members (mainly Brian) during its construction.
[[Category: BattleBots]]
[[Category: FeatherWeights]]
[[Category: BigBots]]

Binari

2022-05-22T19:30:34Z

Lbricker7: /* Competitions */

== Introduction ==
This robot had a name before a design. It born when Brian thought to himself, "Hey, it would be really funny if we named a robot Chonki and made it really, really big and really really loud..." Throughout the design process the robot lived up to its name. Chonkii is a 45lb shuffling shell spinner competing in the 30lb weight class that serves as an iteration on the original Chonki, which was never fully constructed. It was developed during 2021-2022. The drive system was iterated from that of Apachi and Chonki. The weapon system was a brand new concept for BattleBots. The goal of Chonki was to evaluate the viability of shell spinners while taking advantage of the 1.5 times weight multiplier afforded by using a mechanism other than wheels for movement. Competed at Motorama 2022 and finished with a 2-2 record.

Members:
*George 'Knute' Brady (Lead)
*Paul Matesevac
*Lucy Bricker
*James Peavy
*Joe Irwin
*Mannan Goel

== Drive System ==
Chonki utilizes a shuffler system for drive. It consists of two shuffler modules, each with 4 UHMWPE feet. The feet sit on two parallel, keyed cam shafts. These allowed for the four feet to be positioned 90 degrees from each other, so feet would always be in contact with the ground through the cam shaft's rotation. To fit inside the feet get smaller as they move away from the chassis. The longer feet have fillets to clear the rollers and support which they sit under. The cams have offset keyed holes to accommodate the shafts and sit inside circular cutouts in the feet, which keep them parallel with the ground as it walks. The use of the shuffling system allowed Chonki a weight bonus, bringing the max weight to 45 lbs.

[[File:IMG_2847.MOV|480x360px|]]

=== Foot Profile ===

=== Cams and Bearings ===

=== Drive Gears ===

== Weapon System ==

===Design Considerations===
Because we had 2 weapons, it was important to have them be light enough as to not surpass a combined weight of ~15 lbs. The extra weight bonus from the shuffler allowed for this to be much more feasible (also required because we have 2x the weapon motors).

===Weapon Design===

Overall Design: Made to resemble Valkyri's overall weapon stack, minor changes were made to the overall design, A roller bearing (in design) was not needed at the bottom because of the constraint on the shaft itself (enough distance to spin without touching the bottom plate). This did not work, therefore a needle roller bearing should always be strongly considered in future live-shaft designs despite clearance looking good enough.

Weapon: Our weapons were waterjet out of AR500 steel (made from sheets of gun target steel). Each weapon was 0.5 inches in thickness and 11 inches in diameter. The overall shape was intended to put as much mass at the hitting ends as possible, there was no need to save weight therefore we were able to have a solid weapon. There was added structural support around the location that met with our weapon shaft, this was to theoretically prevent any snapping of the weapon (fears due to Apachi's weapon failure). Additionally, the weapon's geometry was made in order to ensure that at the maximum distance, only 1 point has the possibility of hitting (in order to reduce the chance of us 'skimming' the other bot instead of properly hitting it).

Belt Protection: Carbon fiber reinforced nylon material called Onyx, printed on a Markforged 3D printer. The print was not the best, therefore our belt protection was pretty non-existent. Also, the material may not have been a good choice, as carbon fiber doesn't resist instantaneous hits very well.

Lessons:
*Do not use our classical belts, use industrial/automotive belts instead
*Look for better protection for belts/weapon stacks (testing materials/more research)
*AR500 is sorta hard to machine (we need to basically increase the waterjet thickness, machinability, and possibly do 2 passes)

===Weapon Stack and Weapon Pictures===

[[File:Bearing_Section_View.PNG]]

== Chassis System ==
[[File:ChonkiiChassis.png|480x360px|]]
*The chassis mostly consisted of aluminum, featuring of a ¼” top and side plates and ⅛” bottom plate.
*The front and back plates were made of HDPE, which bent to form Chonkii’s robustly round shape.
*The chassis had multiple rollers spaced out along its top, giving additional support to the shell track above.
*The central dead axle was constrained by two blocks, mounted to both the top and bottom plates. However, it was later determined that a single longer block with a key would constrain the shaft better than the two block system.
**While drilling through the blocks into the shaft, a drill bit melted inside, acting as a makeshift pin (that was instantly destroyed in competition).

== Electronics ==
{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| Turnigy Aerodrive SK3 - 5055-280KV Brushless Outrunner Motor
 
|-
| Drive Motor Controllers
| Flipsky Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink Mini Size (whatever apachi used)
|-
| Weapon Motor
| Scorpion SII-4035-250KV
|-
| Weapon Motor Controllers
| Tribunus 06-120A (6S) Brushless ESC
|-
| Receiver
| Hobby King 2.4Ghz Receiver 6Ch V2 
|-
| Remote Control
| Hobby King 2.4Ghz 6Ch Tx and Rx V2 
|-
| Battery
| Turnigy Heavy Duty 5000mAh 6S 60C LiPo Pack w/XT90
Turnigy Graphene Panther 3000mAh 3S 75C Battery Pack w/XT90
|-
|}

== Competitions ==

=== [[AVC_2022|AVC 2022]] ===

*Results: 0-2
**Bracket Style: Double Elimination
***[Binari (loser) V.S. Crippling Depression (winner): YouTube Link]
**** Crippling Depression was a wedge and undercutter combination bot.
**** As an undercutter, the weapon went underneath ours, slightly sheared one of our bolts
**** After getting flipped, they absolutely destroyed the weapon guards and side armor and bent our shuffler system and front plate
**** Lost via tap-out

***[Binari (loser) V.S. HUHMWPE DUHMWPE (winner): YouTube Link]
**** Ripped off sideplate, and the shuffler system slowly fell apart
**** Lost via tap-out
**** More Description

==== Issues ====

* Stuff
* Other Stuff

==== Changes to make ====

* Stuff
* Other Stuff

== Trivia ==
*The Vectrax was rendered inoperable twice by Chonki members (mainly Brian) during its construction.
[[Category: BattleBots]]
[[Category: FeatherWeights]]
[[Category: BigBots]]

RickandMorti

2022-02-25T00:24:48Z

Lbricker7:

A horizontal spinner with a chassis made of aluminum, and a weapon made of steel.

{| class="wikitable" align="right"
|-
! scope="row" colspan="2" style="background-color:#FFFF99" |
|-
! scope="row" colspan="2" | [[File:RickandMorti Team.jpeg|frameless|right|480x360px|(Highlight text)]]
|-
! scope="row" style="text-align:left" | Year of Creation
| {{{year|}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Versions
|-
! scope="row" style="text-align:left" | Current Version
| {{{currver|1.0}}}
|-
! scope="row" style="text-align:left" | Update Year
| {{{updyr|}}}
|-
! scope="row" style="text-align:left" | Wins/Losses
| {{{winloss|}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Information and Statistics
|-
! scope="row" style="text-align:left" | Weight Class
| {{{wc|BeetleWeight}}}
|-
! scope="row" style="text-align:left" | Weapon Class
| {{{weapc|}}}
|-
! scope="row" style="text-align:left" | Combined Wins/Losses
| {{{winloss|}}}
|-
! scope="row" style="text-align:left" | Weapon Speed
| {{{TBA|}}}
|}

== Competitions ==

=== [[Motorama_2022|Motorama 2022]] ===

*Results: Win / Losses
**Bracket Style: Double Elimination
***Loss: INSERT BOT NAME
****INSERT BOT TYPE
***Loss: INSERT BOT NAME
****INSERT BOT TYPE
**Notes:
***

== Version ==

=== RickandMorti V1.0 ===

Created by: INSERT TEAM MEMBERS NAMES HERE

{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| INSERT MOTOR TYPE 
|-
| Drive Motor Controllers
| Scorpion Mini ESC
|-
| Weapon Motor
| (Motor name)
|-
| Weapon Motor Controllers
| (name)
|-
| Receiver
| name 
|-
| Remote Control
| name 
|-
| Battery
| (Battery Name)
|-
| (OTHER:)
| 
|}

==== Problems ====

==== Good aspects ====

==== Changes/Improvements ====

== Notes: ==

[[Category:BattleBots]] [[Category:BeetleWeights]]

File:RickandMorti Team.jpeg

2022-02-25T00:24:20Z

Lbricker7:

RickandMorti

2022-02-25T00:19:59Z

Lbricker7:

{| class="wikitable" align="right"
|-
! scope="row" colspan="2" style="background-color:#FFFF99" |
|-
! scope="row" colspan="2" | [[File:Spinni-Boi.jpg|frameless|right|480x360px|(Highlight text)]]
|-
! scope="row" style="text-align:left" | Year of Creation
| {{{year|}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Versions
|-
! scope="row" style="text-align:left" | Current Version
| {{{currver|1.0}}}
|-
! scope="row" style="text-align:left" | Update Year
| {{{updyr|}}}
|-
! scope="row" style="text-align:left" | Wins/Losses
| {{{winloss|}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Information and Statistics
|-
! scope="row" style="text-align:left" | Weight Class
| {{{wc|BeetleWeight}}}
|-
! scope="row" style="text-align:left" | Weapon Class
| {{{weapc|}}}
|-
! scope="row" style="text-align:left" | Combined Wins/Losses
| {{{winloss|}}}
|-
! scope="row" style="text-align:left" | Weapon Speed
| {{{TBA|}}}
|}

== Competitions ==

=== [[Motorama_2022|Motorama 2022]] ===

*Results: Win / Losses
**Bracket Style: Double Elimination
***Loss: INSERT BOT NAME
****INSERT BOT TYPE
***Loss: INSERT BOT NAME
****INSERT BOT TYPE
**Notes:
***

== Version ==

=== RickandMorti V1.0 ===

Created by: INSERT TEAM MEMBERS NAMES HERE

{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| INSERT MOTOR TYPE 
|-
| Drive Motor Controllers
| Scorpion Mini ESC
|-
| Weapon Motor
| (Motor name)
|-
| Weapon Motor Controllers
| (name)
|-
| Receiver
| name 
|-
| Remote Control
| name 
|-
| Battery
| (Battery Name)
|-
| (OTHER:)
| 
|}

==== Problems ====

==== Good aspects ====

==== Changes/Improvements ====

== Notes: ==

[[Category:BattleBots]] [[Category:BeetleWeights]]

RickandMorti

2022-02-25T00:04:55Z

Lbricker7: Created page with "RickandMorti"

RickandMorti

Motorama 2022

2022-02-25T00:03:40Z

Lbricker7: /* BeetleWeights */

{| class="wikitable" align="right"
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Motorama 2022
|-
! scope="row" colspan="2" |[[InsertPictureFileHere|right|frameless|2022 BeetleWeights]]
|}

== Competition Summary ==

NERC Robot Conflict at Motorama comprises of a Double-Loss Bracket Style tournament (A bot must lose two fights to be eliminated). Motorama hosts a variety of weight classes, including three, twelve, and thirty pound robots, which competed at Motorama this year for RoboJackets.

== Results ==

INSERT 3LB DESCRIPTION HERE

INSERT 12LB DESCRIPTION HERE

INSERT 30LB DESCRIPTION HERE

Video of the matches will be posted on the RoboJackets YouTube page.

== BattleBots taken by the RoboJackets ==

===FetherWeights===

* [[Chonkii]]

===HobbyWeights===

* [[Bucki]]
* [[Hockii]]

=== BeetleWeights ===

* [[Velociti]]
* [[Insaniti]]
* [[RickandMorti]]
* [[3lb Robot 4]]
* [[3lb Robot 5]]
* [[3lb Robot 6]]

[[Category:BattleBots Competitions]]
[[Category:2021-2022]]

Perri

2020-06-12T02:56:28Z

Lbricker7:

{| class="wikitable" align="right"
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Perri
|-
! scope="row" colspan="2" | [[File:perri.jpg|frameless|right|480x360px|Perri]]
|-
! scope="row" style="text-align:left" | Year of Creation
| {{{year|2019-2020}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Versions
|-
! scope="row" style="text-align:left" | Current Version
| {{{currver|1.0}}}
|-
! scope="row" style="text-align:left" | Update Year
| {{{updyr|2019-2020}}}
|-
! scope="row" style="text-align:left" | Wins/Losses
| {{{winloss|0/2}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Information and Statistics
|-
! scope="row" style="text-align:left" | Weight Class
| {{{wc|BeetleWeight}}}
|-
! scope="row" style="text-align:left" | Weapon Class
| {{{weapc|Horizontal Bar Spinner}}}
|-
! scope="row" style="text-align:left" | Combined Wins/Losses
| {{{winloss|0/2}}}
|-
! scope="row" style="text-align:left" | Weapon Speed
| {{{TBA|19392.35294 (according to Cody's excel sheet)}}}
|}

We Are The Meme Team. This is our story.

== Competitions ==

=== [[Motorama_2020|Motorama 2020]] ===

*Results:0/2
**Bracket Style: Double Elimination
***Loss vs Cold Front
****kitbot wedge (was virtually indestructible)
****was able to get a few hits in but lost due to judges decision
***Loss vs The Lid
****its a lid, nuff said
****was unable to turn during match and belt slipped off toward end of match
****failed to avenge Groovi
**Grudge Matches
***Loss vs Huski
****performed well near beginning of match getting a few hits in
****belt slipped off pulley resulting in loss
***Loss vs Vijay Car
****top 10 RoboJackets disappointments
****Literally a plastic toy car from McDonalds
****belt fell off of pulley 5 seconds into match

== Version ==

=== Perri V1.0 ===

Created by: Cole S., Martha L., Nikita C., Simon Y., Paden D., Josh L., Lucy B., and Dennis

{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| (Drive Motor Name) 
|-
| Drive Motor Controllers
| (Drive Motor Controller Name)
|-
| Weapon Motor
| (Weapon Motor Name)
|-
| Weapon Motor Controllers
| (Weapon Motor Controller Name)
|-
| Receiver
| Hobby King 2.4Ghz Receiver 6Ch V2 
|-
| Remote Control
| Hobby King 2.4Ghz 6Ch Tx and Rx V2 
|-
| Battery
| (Battery Name)
|-
| (OTHER:)
| 
|}

==== Problems (where do we start) ====

*A giant moment of inertia (wiggled like an excited puppy)
*Thicker belt expanded and slipped off pulley
*Thinner belt twisted off of the pulley

==== Good aspects ====

*Armor held up well
*Structural integrity was well maintained all throughout matches
*Invertible drive train had no issues
*No electronic issues

==== Changes/Improvements ====

*One piece weapon (we finna yeet that moment)
*Bigger, better, tighter, faster, stronger belt

== Notes: ==

Best design review quote: "You guys shouldn't have that much of a moment. You should be fine."

Name Inspiration: Perry. The. Platypus.

Dooby dooby doo-bah, dooby dooby doo-bah
[[Category:BattleBots]] [[Category:BeetleWeights]]

Perri

2020-02-28T16:21:41Z

Lbricker7:

{| class="wikitable" align="right"
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Perri
|-
! scope="row" colspan="2" | [[File:perri.jpg|frameless|right|480x360px|Perri]]
|-
! scope="row" style="text-align:left" | Year of Creation
| {{{year|2019-2020}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Versions
|-
! scope="row" style="text-align:left" | Current Version
| {{{currver|1.0}}}
|-
! scope="row" style="text-align:left" | Update Year
| {{{updyr|2019-2020}}}
|-
! scope="row" style="text-align:left" | Wins/Losses
| {{{winloss|0/2}}}
|-
! scope="row" colspan="2" style="background-color:#FFFF99" | Information and Statistics
|-
! scope="row" style="text-align:left" | Weight Class
| {{{wc|BeetleWeight}}}
|-
! scope="row" style="text-align:left" | Weapon Class
| {{{weapc|Horizontal Bar Spinner}}}
|-
! scope="row" style="text-align:left" | Combined Wins/Losses
| {{{winloss|0/2}}}
|-
! scope="row" style="text-align:left" | Weapon Speed
| {{{TBA|19392.35294 (according to Cody's excel sheet)}}}
|}

We Are The Meme Team. This is our story.

== Competitions ==

=== [[Motorama_2020|Motorama 2020]] ===

*Results:0/2
**Bracket Style: Double Elimination
***Loss vs Cold Front
****kitbot wedge (was virtually indestructible)
****was able to get a few hits in but lost due to judges decision
***Loss vs The Lid
****its a lid, nuff said
****was unable to turn during match and belt slipped off toward end of match
****failed to avenge Groovi
**Grudge Matches
***Loss vs Huski
****performed well near beginning of match getting a few hits in
****belt slipped off pulley resulting in loss
***Loss vs Vijay's Car
****top 10 RoboJackets disappointments
****Literally a plastic toy car from McDonalds
****belt fell off of pulley 5 seconds into match

== Version ==

=== Perri V1.0 ===

Created by: Cole S., Martha L., Nikita C., Simon Y., Paden D., Josh L., Lucy B., and Dennis

{| border="1" cellspacing="1" cellpadding="1" style="width: 500px;"
|-
| Drive Motors
| (Drive Motor Name) 
|-
| Drive Motor Controllers
| (Drive Motor Controller Name)
|-
| Weapon Motor
| (Weapon Motor Name)
|-
| Weapon Motor Controllers
| (Weapon Motor Controller Name)
|-
| Receiver
| Hobby King 2.4Ghz Receiver 6Ch V2 
|-
| Remote Control
| Hobby King 2.4Ghz 6Ch Tx and Rx V2 
|-
| Battery
| (Battery Name)
|-
| (OTHER:)
| 
|}

==== Problems (where do we start) ====

*A giant moment of inertia (wiggled like an excited puppy)
*Thicker belt expanded and slipped off pulley
*Thinner belt twisted off of the pulley

==== Good aspects ====

*Armor held up well
*Structural integrity was well maintained all throughout matches
*Invertible drive train had no issues
*No electronic issues

==== Changes/Improvements ====

*One piece weapon (we finna yeet that moment)
*Bigger, better, tighter, faster, stronger belt

== Notes: ==

Best design review quote: "You guys shouldn't have that much of a moment. You should be fine."

Name Inspiration: Perry. The. Platypus.

Dooby dooby doo-bah, dooby dooby doo-bah
[[Category:BattleBots]] [[Category:BeetleWeights]]